Vinyl Review

Cherry Audio Aluminium Sub-Platter for Rega Turntables

By ·

Cherry Audio Aluminium Sub-Platter for Rega Turntables

My Custom Rega-Based Turntable, Part 6

About this series

This is the sixth in my series of reviews of the parts in my custom Rega-based turntable. So far I’ve covered the RB300 tonearm, the 24V motor and Neo PSU, the twin 33/33 pulley and belts, the SRM Tech kit, and my own acrylic and ceramic ball isolation layer. This time I’m back to the heart of the drive system: the sub-platter and bearing.

Why I chose it

The sub-platter is what the belts drive and what the platter sits on, so any imperfection here goes straight into the rotation of the record. After all the work I’d put into the motor, pulley and belts, it made sense to upgrade the part they all connect to. The Cherry Audio aluminium sub-platter was the obvious choice.

Build and quality

It’s beautifully machined from aluminium and feels precise and solid in the hand. It’s a clear step up from the standard part, with the kind of finish that tells you it’s been made to fine tolerances. It drops straight into a Rega-based deck without any fuss.

Paired with a polished ceramic bearing

I run the sub-platter with a polished ceramic ball bearing. The ceramic ball is hard and very smooth, and polishing it takes that further, cutting bearing noise to an even lower level. With so much of my build focused on removing vibration and noise, it made sense to make sure the bearing wasn’t adding any of its own.

The results

Rotation is smooth, quiet and steady. The platter spins freely and evenly, and the background stays as dark and silent as the rest of the system has made it. Combined with the twin belts and the Neo, timing feels locked in and the music has a calm, confident flow.

Looking ahead

I’m very happy with the ceramic bearing, but I might move to a ruby bearing in the future. It’s one of those upgrades that’s always in the back of my mind, and the Cherry Audio sub-platter gives me a great base to try it on when the time comes.

Final verdict

The Cherry Audio aluminium sub-platter is a superb upgrade for any Rega-based turntable. It’s well made and precise, and with a polished ceramic bearing it gives the drive system a smooth, quiet foundation to work from. It’s earned its place in my build, and I’d highly recommend it.

Get new reviews by email

An occasional email from Phil when new reviews go up. No spam, unsubscribe any time.

Your email is only used for these updates. How your details are kept.