Vinyl Review

Custom Acrylic and Ceramic Ball Isolation Layer

By ·

Custom Acrylic and Ceramic Ball Isolation Layer

My Custom Rega-Based Turntable, Part 5

About this series

This is the fifth in my series of reviews of the parts in my custom Rega-based turntable. So far I’ve covered the RB300 tonearm, the 24V motor and Neo PSU, the twin 33/33 pulley and belts, and the SRM Tech kit. This one is a bit different, because it isn’t something you can buy. It’s a part I designed myself.

Why I made it

The Fluance IB40 does a great job of soaking up vibrations from the floor, and the SRM Tech kit keeps motor noise away from the platter and arm. But I wanted to go one step further and deal with the higher-frequency vibrations that can still find their way up into a turntable. I couldn’t find anything off the shelf that did exactly what I wanted, so I built it.

The design

The idea is simple. Two acrylic sheets are separated by five small ceramic balls. The tiny contact points of the balls mean there’s very little for vibration to travel through, and the acrylic helps to damp what’s left. Higher-frequency vibrations resonate away from the turntable instead of passing up into it.

A little help from a friend

I couldn’t have made this without a good friend, who custom cut the acrylic sheets for me. They also machined small indents into the acrylic for the ceramic bearings to sit in. This keeps each ball exactly where it should be, so the bearings can’t roll away and the two sheets stay perfectly aligned. It’s a small detail, but it turns a good idea into a solid, dependable part of the system.

Where it sits

The layer sits between the Fluance IB40 isolation platform and the turntable itself. The IB40 takes care of the floor, my acrylic and ceramic layer deals with the higher frequencies, and the SRM Tech kit isolates the motor from the platter and arm. Each layer handles its own job.

The complete anti-vibration system

With this final piece in place, the whole system works together. Floor vibration, higher-frequency resonance and motor noise are each dealt with at a different stage, so audible vibrations are stopped before they can reach the stylus. All that’s left for the cartridge to read is the groove.

The results

The sound is even cleaner and more focused. The black background the SRM Tech kit gave me is now deeper still, and there’s a real sense of calm and precision to the music. Fine detail and the decay of notes come through more clearly than ever.

Final verdict

I’m proud of this one, and grateful to my friend for helping bring it to life. It’s a simple, inexpensive design, but it completes the anti-vibration system I’ve been building throughout this series. If you enjoy tinkering, it’s well worth experimenting with something similar. Sometimes the best upgrade is the one you make yourself, with a little help.

Get new reviews by email

An occasional email from Phil when new reviews go up. No spam, unsubscribe any time.

Your email is only used for these updates. How your details are kept.