Milty Zerostat 3 Anti-Static Gun Review

Overview
The Milty Zerostat 3 is a piezoelectric anti-static pistol. It sits outside the four cleaning stages in my regime, because it deals with a different problem: the static charge that builds up on vinyl and pulls in dust. It needs no batteries and no power, and it leaves no residue the way an anti-static spray would.
What it is
It’s a compact hand-held gun, about 11cm long and light, which works by squeezing and releasing a trigger. The mechanical action generates positive ions on the squeeze and negative ions on the release. Those ions neutralise the static charge on the surface of the record. It’s also used in laboratories, for example in microscopy, to get dust off lenses, slides and samples. It’s rated for about 10,000 uses, and a test procedure is included so you can check that it’s working. The ion indicator that comes with it is for testing only and needs to come out of the barrel before you use the gun on a record.
How I use it
I used this a lot at first, and I still use it, but I’ll be honest that it requires precise technique. The maker says to hold it about 30cm (12″) from the surface and to squeeze and release the trigger slowly and fully. The slowness matters, and a quick, half-hearted squeeze doesn’t do the job. You can’t see or feel anything happening, so you have to trust the technique and judge it by the results.
When it’s done properly, it does actually work. Static clinging to the record drops, and so does the dust that gets drawn onto it. The catch is that I find it needs using on each side of the record before you play it. Static comes back, and one side treated doesn’t help the other. I treat both sides before the record goes on the platter.
In use
It’s quick once you’ve got the technique, though it adds a small step to every play. It isn’t a cleaner, so it won’t remove dirt that’s already in the grooves. That’s what the four stages are for. What it does is stop a freshly cleaned record picking up dust straight away, and stop the pops and crackle that static can cause.
It’s best thought of as a finishing habit and not a cure. Dry air and some mats make static worse, so how often it’s needed depends on your room and set-up.
Value for money
It isn’t cheap for what looks like a small plastic pistol. But it’s well made, it has a long working life, and it does something that sprays and brushes can’t do as cleanly. If you play a lot of vinyl and static is a problem, it’s worth having.
Verdict
The Milty Zerostat 3 does what it claims, as long as you take the time to learn the technique. It’s a useful companion to a cleaning regime, and it works best when you use it on both sides before every play. I recommend it, with the caveat that you do need to use it carefully.