Vinyl Review

SPINCARE Record Cleaning Machine Review: Stage Two of My Cleaning Regime

By ·

SPINCARE Record Cleaning Machine Review: Stage Two of My Cleaning Regime

Overview

This is the second article in my series on how I clean my records. In stage one I covered the SPINCARE cleaning kit and my two cleaning mats. Stage two is the SPINCARE Record Cleaning Machine (RCM), a manual washing basin, and I’ll cover the remaining stages in separate articles.

What it is

The RCM is a simple, non-electric record washer. It has a few parts:

  • Washing sink, which holds the water
  • Two pre-fitted velvet brushes that clean both sides of the record at the same time
  • Two rollers, which you set to a 7″, 10″ or 12″ position
  • Two microfibre drying cloths, 35cm x 35cm
  • Drying rack, which holds up to 10 records and stores under the sink
  • Cleaning solution (two 150ml bottles), which I don’t use, as I explain below

It’s designed to handle batches of 25 to 50 records per session. Everything stores inside the basin with the lid on, so it takes up very little space when it’s not in use.

How I actually use it

I use this machine for one job only: as a rinse. I fill the sink with distilled water and nothing else, with no cleaning fluid added. I run each record through it to rinse off any chemicals that may still be present after stage one. The cleaning solution from the first stage does its work, and I then want to be sure no residue is left behind on the vinyl.

The instructions call for distilled or deionised water, so that fits how I use it. The basin and brushes are well suited to this role. The velvet brushes touch both sides of the record at once, and the rollers hold it steady and let it turn smoothly. Following the instructions, I rotate the record three times in one direction and three in the other. I then dry it with the microfibre cloths and stand it in the rack until it’s fully dry.

Using plain distilled water also keeps the process simple. There’s no mixing or measuring, and the water gets changed regularly.

Build and practicality

The build is simple and sturdy enough for what it is. The rollers and rack have rubber contacts, so the record is held securely without being scratched, and the brushes click in and out so they’re easy to rinse and dry. It’s quick to set up and quick to put away. The drying rack is the feature I appreciate most, because the records have somewhere safe to dry and aren’t lying around the room.

Since it’s manual, you have to put in a little effort and patience. It isn’t a vacuum machine, and I don’t treat it as one.

Value for money

It’s a modest outlay, and it does the job properly. For a rinse stage, I don’t need anything more complicated or expensive. It’s a sensible, well-designed piece of kit that earns its place in the process.

Verdict

The SPINCARE RCM is a good, practical machine, and I’m using it in a slightly unusual way. As a dedicated distilled water rinse after stage one, it fits my regime well, and I recommend it. The next articles will cover what comes after.


Get new reviews by email

An occasional email from Phil when new reviews go up. No spam, unsubscribe any time.

Your email is only used for these updates. How your details are kept.